Part 1 Theory of Reverse Osmosis units and how to optimize p

Posted on May 8th, 2009 by admin

Filed under Reverse osmosis systems |

This is part 1 of a 2 part series on how you can configure a working whole-house RO system.

Duration : 0:9:55


Technorati Tags: , , , , , , , , ,

9 Responses

  1. rldel149 Says:

    Thank you. Many …
    Thank you. Many places in the word don’t have fresh water. RO systems can’t handle all hazards such as radon gas but they are often effective with many others.

  2. krozzie303 Says:

    I admire the …
    I admire the technical aspects. You are very informative and have given a great outlook on the concepts of Reverse Osmosis.

    Recommended video on the subject

  3. rldel149 Says:

    yes. In fact there …
    yes. In fact there are mechanical shut-off available to control the thing when satisfied.

    The system is differential pressure driven. In this example, small electric pump was used to elevate the pressure (creating a larger delta-P) but as long as the necessary pressure difference exists across the membrane, it will produce water. The greater the difference, the greater the production.

  4. jws54 Says:

    could this be done …
    could this be done with no electricity as in the high side could be loaded from a water tank and create a self running unit drivn by water power only fed by gravity?

  5. rldel149 Says:

    An old version of …
    An old version of Adobe Photoshop 4 that came with a Microtec scanner about 15-16 years ago.

  6. thestar13 Says:

    Nice video, I had a …
    Nice video, I had a quick question about what you use for your animation in your videos, is it microsoft paint or do you have a special software

  7. rldel149 Says:

    I have shot part 2 …
    I have shot part 2 (inside the house and it is definitely home made). Membranes are commercially available. It is too long for one shot, probably boring to most folks and I just have not rendered/uploaded it yet.

  8. Bballjamal Says:

    Very informative! …
    Very informative! Any idea on any specifics of the membrane availible? I’m th sinking since they have to be some small you must use some type of laser procedure for a diameter in the thousandths. Really looking to see if it is at all possible to do this homemade.

  9. misk Says:

    thanks about this video

Leave a Comment

Please note: Comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.

|